- When discharging a fixed amount of granules from a tank, etc., it is necessary to control the weighing and discharge rate.
　By installing the GSL-20/GSL-30 grid scale under the tank, it is possible to discharge a fixed amount of granules from 8 kg to 99999 kg
　 with an accuracy of 0.1% of the full capacity of the weighing tank.
- When the Grid Scale is installed in the conveying channel, it can be used as a flowmeter.
- Grid Scale can be used as a stand-alone meter since the main unit is equipped with a touch panel.
- The GS Remote Controller GSR-1P can remotely control up to four Grid Scale units, and the results can be printed out on the built-in printer.

Installed directly under the tank (metered discharge meter)

Installed in the conveying channel (flowmeter)

What we can do with measurement
- The height of the GSL-20 and GSL-30 is approximately 30 cm and 46 cm, respectively, making it possible to install them in a small space in a facility as compact weighing machines.
- The GSR-1P remote controller has a built-in printer, so calculation results can be printed.
- The side, front, and rear covers can be easily removed for easy maintenance inside the weighing machine.
- Stainless steel SUS304 is used for the particle contact surface, which is hygienic.

Selection Points
Quantitative discharge meter and flowmeter
　- Compact height
　- Removable panel for easy internal maintenance.
　- Stainless SUS304 for particle contact surface: hygienic