Applications

Transmission of drive current values of solenoid valves to control equipment via CAN-BUS with 1 ms updates.

Solenoid valves

→→ Drive current value

Ammeter PSA-2401

→ CAN BUS

PLC, PC, etc.

What can be done with measurement

- Output PWM drive current value of solenoid valve with 1ms update for real-time measurement and feedback control.

- CAN 1ms update and 16bit analog 1ms update can be output simultaneously.

- Setting and logging are possible through the USB Type-C connector using COCORESEARCH's measurement management software LINKSHIP (free of charge).

Selection Points
Current measurement
- 16bit analog output with 1ms update and CAN communication (option)
- Real-time measurement and feedback control of PWM drive current values

Low cost
- PSAL-2401: Low-cost DC ammeter. High-precision (16bit, update time: 40ms~) analog output is available as an option.

Products

Products		Points	Overviews
	PSA-4801 DC Ammeter Product page	Current measurement USB RS-485 Modbus CAN Analog output Alarm output LINKSHIP compatible	- 48x96 size DC ammeter suitable for real-time measurement and feedback control of solenoid valve (proportional control valve) PWM current. - Low loss due to shunt resistance of 40mΩ or less, also suitable for charging current evaluation. - LINKSHIP compatible with simultaneous 1ms update 16bit analog output and CAN output, and logging/setting via USB.
	PSA-2401 DC Ammeter Product page	Current measurement USB RS-485 Modbus CAN Analog output Alarm output LINKSHIP compatible	- 24x48 size DC ammeter suitable for real-time measurement and feedback control of PWM current of solenoid valve (proportional control valve). - Low loss due to shunt resistance of 40mΩ or less, also suitable for charging current evaluation. - LINKSHIP compatible with simultaneous 1ms update 16bit analog output and CAN output, and power supply/ logging/ setting via USB.
	PSAL-2401 DC Ammeter Product page	Current measurement Low Cost USB RS-485 Modbus CAN Analog output Alarm output LINKSHIP compatible	- 24x48 size DC ammeter suitable for real-time measurement and feedback control of solenoid valve (proportional control valve) PWM current. - Low loss with shunt resistance of 40mΩ or less, ideal for charging current evaluation. - LINKSHIP compatible with simultaneous 40ms update 16bit analog output and 40ms update CAN output, and power supply/ logging/ setting via USB.

Related Measurement Keywords

Signal Converter