Applications

CAN to Voltage Conversion

The CAN series can be used as signal converters to convert and output data on the CAN bus to analog signals such as voltage, and
can be used to check CAN data used in construction machinery, ships, industrial equipment, etc.

Measurement image


Vehicle, etc.

CAN data
→→
Conversion


CAN analog converter CAN/CANL series		 Analog output
→→
Check data with your own equipment
Easy acquisition of CAN signals

Data logger, oscilloscope, etc.

What can be done with measurement
- Data can be easily and inexpensively viewed with your own equipment (analog input), such as data loggers, oscilloscopes, etc.
- Convert CAN data from vehicles to analog output and save it to a data logger or other device for later review.
- Analog output can be updated in 1 ms at the fastest.
- The one-channel type is reasonably priced and easy to use.Selection Points

Selection Points
CAN data conversion
- Easy-to-use 1-channel type
- Analog output with 1ms update is available.
- 5 analog output types: 0-10V, 0-5V, ±10V, ±5V, 4-20mA [Select model when ordering] 2.

Low price
- Data can be easily and inexpensively viewed with your own equipment (analog input), such as loggers and oscilloscopes.
- Low-cost version of CANL series is also available: Analog output is updated for 40 ms.

Products
Products Points Overviews
CAN-2401
CAN to Analog
Converter
Product page

USB
Analog output
Alarm output
LINKSHIP compatible

Converts and outputs CAN digital values to voltage signals, etc. Compact 24 x 48 size.
16bit analog output (1 ms).
LINKSHIP" compatible with power supply/logging/setting via USB.

CAN-2401: Panel mounting with indicator
CAN-2451: Without display, DIN rail mounting
CAN-2431: With indicator, DIN-rail mounting

CANL-2401
CAN to Analog
Converter
[Low price type]
Product page

USB
Analog output
Alarm output
LINKSHIP compatible

Converts and outputs CAN digital values to voltage signals, etc. Compact 24 x 48 size.
16bit analog output (40 ms).
LINKSHIP" compatible with power supply/logging/setting via USB.

CANL-2401: Panel mounting with indicator
CANL-2451: Without display, DIN rail mounting
CANL-2431: With indicator, DIN-rail mounting



Customized products
The above models are customized products, such as boxed products.
　
  Name Input 16bit analog output Alarm
output		 Power
supply (V) 		External
dimensions		 Other features
  Update time

With SD logger
CAN Analog
Converter
[Custom boxed]

JPN page

CAN 2.0 0-10V
0-5V
±10V
±5V
4-20mA
【Select a model】		 1-9999ms/
40-9999ms
【Select a model】		 2 points/
4 points		 Selectable
AC100/
DC8-30
etc.
【Select a model】 		W 120
H 48
D 160
*Excluding
protrusions and legs.

- Equipped with slot for SD card
[With operation indicator LEDs]
Logging data storage

- Logging start/stop/ Power ON/OFF by front switch

- Rear connectors to choose from (any combination):
Terminal block BNC LAN Dsub, etc.


Example: 20CH type

Multi-CH type
CAN Analog
Converter

JPN page

Please consult us

Please
consult us

 DC 8-30
AC adapter
available 		W 126
H 53
D 128
*Excluding
protrusions and legs.

- Number of CHs to choose from

- Outputs to choose from
RS485, Ethernet, 16bit analog, HDMI, Alarm output, etc.

- Selectable rear connectors):
Terminal block BNC LAN Dsub USB-C, etc.

- LCD monitor: With/without (to be specified at the time of order):
Display timing, units, etc. can be freely set.

Please contact us for customization other than the above.
　Contact Us