■ indicates standard specifications (※ can be omitted)
Configuration Examples:| ① | Type (Please refer to the figures below) | |
|
Front USB | |
|
Rear USB / Waterproof gasket included | |
|
With Display / DIN rail mounting bracket included * | |
|
Without Display / DIN rail mounting bracket included * | |
| * Without mounting hook | ||
| ② | Number of Channels | |
|
1CH | |
| ③ | Single-phase / A/B-phase | |
|
Single-phase | |
|
A/B-phase * Cannot be selected simultaneously with Line Driver input | |
| ④ | Input Signal | |
|
General-purpose | |
|
Line Driver | |
|
Input Isolation | |
| ⑤ | Sensor Power Supply [Option] | |
|
None | |
|
+12V 60mA max | |
|
+5V 150mA max | |
|
Other voltage xxV (Please consult us) | |
| Other voltage examples | ||
|
+24V | |
|
+3.3V | |
| * Terminal layout of the sensor power option may vary depending on other options. If you require the sensor power option, please contact us in advance. | ||
| ⑥ | Option 1 | |
| Analog Output | ||
|
None | |
|
0-10V | |
|
0-5V | |
|
±10V | |
|
±5V | |
|
4-20mA | |
|
1 Alarm Point * Only when C2 is not applicable | |
|
2 Alarm Points * For general-purpose input | |
|
No output option for both ⑥ & ⑦ | |
| ⑦ | Option 2 | |
| Digital Communication | ||
|
None | |
|
CAN | |
|
Modbus RTU (In preparation) | |
|
RS-485 | |
|
2 Additional Control Inputs | |
|
2 Alarm Points | |
| Analog Output | ||
|
0-10V | |
|
0-5V | |
|
±10V | |
|
±5V | |
|
4-20mA | |
| If both Options 1 & 2 are analog outputs, please write them in alphabetical order. Example: ○ E1I1 (E comes before I) × I1E1 |
||
| ⑧ | Display Color | |
|
Red | |
|
Green | |
| ⑨ | Terminal Block Type | |
|
Horizontal Spring-lock ![]() |
|
|
M2 Screw Plug Connector ![]() |
|
| [0] Type 2401 |
| Front USB |
![]() |
| [1] Type 2411 |
Rear USB, Waterproof Gasket Included A: Rear USB Type-C ConnectorB: Front panel waterproof gasket included |
| [3] Type 2431 |
With Display, DIN Rail Mount C: DIN rail mounting bracketD: No mounting hook E: Connector * DIN rail is not included |
| [5] Type 2451 |
Without Display, DIN Rail Mount F: DIN rail mounting bracketG: No display H: No mounting hook * DIN rail is not included |