1. F/V Frequency to voltage converters > F/V converter ListHigh speed response and high accuracy with the original PERIOMATICTM method. Strong even at very low speeds. | |||||||
2ch for analysis | For analysis | Deviation output function included converter | Small size | Programable | F/V, F/D | 4CH | |
KAZ-Mighty2
2CH version of KAZ-Mighty |
KAZ-Mighty
0.23Hz-250kHz 1 pulse response |
KAZ-723A
0.04Hz-200kHz 1 pulse response |
KAZ-740P
Handheld type high performance |
KAZ-738
Output uptdate 1ms |
FUV-16/FUD-16
Hybrid ICs |
KAZ-7226
0.006Hz-100kHz measurement |
|
2. Speedmeters[Tachometers, Frequency meters], FlowCounters > Speedmeter ListHigh speed response and high accuracy with the original PERIOMATICTM method. Strong even at very low speeds. | |||||||
Speedmeter/Counter[Switchable] CAN, 16-bit analog output | Speedmeter/Counter[Switchable] | Speedmeters | Flow meter and Counter | ||||
SPD-4801 48x96 DIN Output uptdate 0.1ms- |
SPD-2401
24x48 DIN Output uptdate 0.1ms- |
SPDL-2401
Output uptdate 40ms- |
SPD-HD Handheld type high performance |
TDP-4921/4931 TDP-39 upward compatible |
TDP-3941 High-speed F/V function with 1-pulse response |
PFC-4921 For length measurement, angle, displacement, flow rate, etc. |
|
Rotational speed ratio meter | Frequency Accelerometer | ||||||
FRM-3921 2ch simultaneous measurement Speed, ratio/ratio |
FAM-3921 Calculated from frequency |
||||||
3. Counters [Totalizer] | |||||||
Pulse Counters [Totalizers] | Pulse Counter with high speed analog output | 2-input transfer deviation meter | Speedmeter/Counter [Switchable] |
Frequency Input Calculation Module | |||
CNT-4921/4931
CNT-39 upward compatibl |
CNT-4922
8-digit display and output |
CNT-723 0-2MHz CAN option |
CRM-281 | SPD-HD Handheld type high performance |
FCFP21 | ||
4. Multi-channel input comparators |
5. Frequency Accelerometer |
6. V/F converter |
|||||
Rotational speed ratio meter | 2-input transfer deviation meter | Frequency Accelerometer | Frequency Input Calculation Module | V/F converter | |||
FRM-3921 2ch simultaneous measurement Speed, ratio/ratio |
CRM-281 | FAM-3921 Calculated from frequency |
FCFP21 | KAZ-6512 | |||
7. Torque to analog converters |
8. CAN to analog converters No analyzer needed to check data. |
||||||
Torque meter / Frequency deviation meters CAN, 16-bit analog output | 2ch High Speed Torque - Analog Converter | High Speed Torque - Analog Converter | CAN-to-analog converters No analyzer needed to check data |
||||
TQ-4801
48x96 DIN Output uptdate 0.1ms- |
TQ-2401
24x48 DIN Output uptdate 0.1ms- |
TQL-2401
Output uptdate 40ms- |
HS-TACⅡ
2CH version of HS-TAC |
HS-TAC
Simultaneous measurement of torque variation and speed |
CAN-2401
Output uptdate 1ms- |
CANL-2401
Output uptdate 40ms- |
|
9. ThermometersCAN, 16-bit analog output | |||||||
Thermistor meters High accuracy by original calculation | Resistance thermometers [RTD] with resistance value check function | Thermocouple meters With types K, J, R, E, T, B, N, S | |||||
HT-2401T
24x48 DIN Output uptdate 1ms- |
HTL-2401T
24x48 DIN Output uptdate 40ms- |
HT-4801R
48x96 DIN Output uptdate 1ms- |
HT-2401R
24x48 DIN Output uptdate 1ms- |
HTL-2401R
24x48 DIN Output uptdate 40ms- |
HT-4801
48x96 DIN Output uptdate 2ms- |
HT-2401
24x48 DIN Output uptdate 2ms- |
HTL-2401
24x48 DIN Output uptdate 40ms- |
10. DC Ammeter/VoltmetersCAN, 16-bit analog output |
|||||||
DC Ammeters Measurement ±10A to ±100µA、Shunt resistor 40mΩ | DC Voltmeters Measurement ±70V to ±10mV、oversampling 250kHz | ||||||
PSA-4801
48x96 DIN Output uptdate 1ms- |
PSA-2401
24x48 DIN Output uptdate 1ms- |
PSAL-2401
24x48 DIN Output uptdate 40ms- |
PSV-4801
48x96 DIN Output uptdate 1ms- |
PSV-2401
24x48 DIN Output uptdate 1ms- |
PSVL-2401
24x48 DIN Output uptdate 40ms- |
||
11. Resistance metersCAN, 16-bit analog output |
|||||||
Resistance meters For Displacement sensors, Resistive output sensors, etc. | |||||||
RR-4801
48x96 DIN Output uptdate 1ms- |
RR-2401
24x48 DIN Output uptdate 1ms- |
RRL-2401
24x48 DIN Output uptdate 40ms- |
|||||
12. Gear Tooth Sensors [To the Gear Sensor List] | |||||||
Magnetic Gear Speed Sensors | Electromagnetic Pickup | Magnetic velocity sensor for fine wires | Customized support | ||||
IMG12/16
0Hz-measurement,Jitter suppression,Noise immunity |
FDP10/16
All threads, general-purpose, easy installation |
FP12T-50
Wide temperature range |
RFP16A/D
Detects both forward and reverse directions with a single device |
GP12/16
No power supply required Self-powered |
FSP12-50 Dedicated to thin plate and fine wire magnetic materials |
Specified connector, fixing flange, tip, cable length, etc. | |
13. Flow Sensors |
14. Pulse Generator |
15. Grain Weighing Machine |
|||||
Volumetric Flow Sensors | Pulse Generator | GRIDSCALETM | |||||
XFS Series
Compact, lightweight, high accuracy |
QP-3X
Handy and high performance, 3 types of oscillation |
GSL-20/GSL-30
Compact and lightweight. For rice, beans, wheat, chaff, etc. |
|||||
16. Signal Converters, Conditioners [To the Signal Converters List] | |||||||
Line Drivers | Line Receivers | Pulse Isolator | Isolated Divider | Isolated Two-multiplier | Zero cross Iinterface | Dual Line Receiver | |
LD series | LR series | CPI-DN1 | CPD-DN1 | CPM-DN1 | CPA-DN1 | LR-1255 | |
17. Others | |||||||
Wheel encoders for Automobile Driving Test |
Program Loaders | DIN Rail Mounting Brackets | USB cable for communication | Carrying Case | |||
WE series | PL-5A | PL-1A | BXF-DN2 | BXF-DN1 | BXI-U** | BXS-1 | |
Manufactured by Peiseler |
|||||||
18. Boxed, Custom, Special editions Can be calibrated by us as an embedded product >To Customized Products List >To Special Specifications List | |||||||
Boxed Experimental | Rack Mounted, Control Box | SD logger included | CAN Voltage Converter Voltage CAN Converter |
HDMI output, multi-CH | Compact Multi-CH | Special edition Elapsed time measurement |
Custom Sensors |
Measurement type, number of CHs, connectors, etc. that can be specified |
For small-scale measurement systems (software/hardware), etc. |
Save logging data to SD card | CAN to voltage conversion/ Voltage to CAN conversion |
Multi-CH voltage monitor display *Monitor not included |
Measurement type, number of CHs, etc. that can be specified | Elapsed time is measured each time an object or person passes by. | Connectors, flanges, tips, cable lengths, etc. |