- Accepts open collector, voltage pulse, and AC signal inputs from various sensors to operate as a frequency meter, tachometer, flow monitor, speedometer, and more.
- Supports A/B-phase encoder inputs, up/down separate pulses, and direction signals to enable reversible measurement.
- Equipped with a 2-channel comparator output as standard.
- Optional features include analog outputs and RS-485 digital communication, allowing the unit to serve as a core control device.
- Offers superior performance compared to the legacy 39 series, featuring enhanced input frequency range, elevated input resolution, accelerated analog output refresh times, advanced analog resolution, and full compatibility with LINKSHIP configuration software.
In addition to single-phase signals such as open collector, contact pulse, voltage pulse, and AC, it also natively handles A/B-phase, up/down separate pulses, and direction signals.
Reversible/reverse rotation measurement is fully operational during 2-phase input.
Universally compatible with diverse pulse-output sensors, including magnetic gear speed sensors, electromagnetic pickups (generating types), flow sensors, rotary encoders, photoelectric sensors, and linear scales.
Measures inputs from 0.0006 Hz to 4 MHz (single-phase) / 0.0006 Hz to 1 MHz (A/B-phase) seamlessly without requiring manual range switching.
Input resolution has been enhanced to 26 ns, and display accuracy has improved to 5 ppm ± 1 digit.
The optional analog output module resolution is increased to 16-bit, achieving a ultra-fast output refresh time of 0.5 ms.
A) COCORESEARCH's proprietary mounting mechanism: Single operator installation from the front panel.
B) The front bezel can be removed without tools by pressing the left and right release levers.
C) Input signal indicator LEDs
D) Individual ID node switches for multi-device configurations *Active only with RS-485 option
E) HIGH comparator status LED
F) LOW comparator status LED
G) ENTER button
H) Value adjustment button
J) Digit selection button
K) MODE button
Set comparator limits and values via internal push buttons
Set comparator thresholds instantly via digital thumbwheel switches
Allows saving two independent calculation rates.
Toggle inputs to switch between two different process operations, or display two separate scaling units using a single sensor setup.
| > Learn More |
Equipped with a 2-channel comparator output as standard. Features solid-state PhotoMOS relays compatible with both AC and DC loads, eliminating contact chattering and making it ideal for interfacing with PLCs and computers.
Supports input pulse division, time averaging, and moving averages to provide robust filtering and highly optimized measurement baselines.
| > Learn More |
| > Learn More |
[Current Value]
Locks value at a specific timestamp
[Minimum Value]
Updates only when a lower limit is met
[Maximum Value]
Updates only when a higher limit is met
Enables seamless transfer of captured tracking logs to a computer or direct communication with LINKSHIP configuration software.
*Requires an optional RS-232C communication cable (sold separately). Models: CSS-M06D09 (D-SUB 9-pin) or CSS-M06D25 (D-SUB 25-pin).Cable Length: 2.5mAdds 2 additional channels to the baseline 2-channel comparator setup, allowing up to 4 total independent HIGH/LOW comparator output stages.
*With BCD connector assembly attached| > View Case Studies |
