- Burn-in tests evaluate the durability of electronic components by applying temperature and voltage loads to them to reduce initial defects and accelerate degradation before shipment.
- There are different types of burn-in tests such as dynamic burn-in, monitored burn-in, static burn-in, etc., depending on the purpose.。

Temperature Pressure Current	→	Thermostatic bath	Temperature Voltage Current Resistance Frequency	HT PSV PSA RR SPD	CAN USB Analog Output RS-485 →→→→→→		PC
	→						Oscilloscope Data logger
Signal input	→		Characteristic measurement		Good/Fail judgment Alarm Output →→→→→→		PLC

What you can do with the measurement
- Built-in to burn-in test equipment to measure temperature (HT, HT-R series), voltage (PSV series), current (PSA series), and other characteristic tests.
- CAN 1ms～ update and 16bit analog 0.1ms～ update can be output simultaneously (option).
- COCORESEARCHh's measurement management software LINKSHIP (free of charge)
Configuration and logging are available through the USB Type-C connector on the main unit of the instrument.

Selection Points
Thermocouple measurement
　16bit analog output with 2ms update and CAN communication (option)
　　
RTD ResistanceThermocouple measurement
Voltage measurement
Current measurement
Resistance measurement
　16bit analog output with 1ms update and CAN communication (option)

Speed (frequency) measurement
　16bit analog output with 0.1ms update, CAN communication with 1ms update (option)

Low Price
　HTL-2401, HTL-2401R, PSVL-2401, PSAL-2401, RRL-2401, SPDL-2401: Low cost instruments.
　High-precision (16bit update time from 40 ms) analog output and CAN communication are available as options.