- High-speed pulse totalizer supporting inputs up to A/B phase 1.5 MHz.
- Scales count values for a full 8-digit display.
- Provides full 8-digit BCD output.
- Connects with pulse output sensors such as rotary encoders, linear gauges, wire encoders, and positive displacement flow sensors.
- Ideal for length, angle, displacement, and integrated flow measurements.
- External Control Inputs: Reset, Preset, and Data Hold.
- Outputs: Comparator (Alarm), Analog, BCD, and RS-485.
[ General-purpose Input Specification ] Model: CNT-4922
| Logic Input | Single-phase Pulse | 0 - 4 MHz |
| UP/DOWN Signal (Separate Pulse) | 0 - 4 MHz | |
| A/B Phase Signal (90° Phase Difference, Internal x4 Counting) | 0 - 1.5 MHz | |
| Direction Signal | 0 - 4 MHz | |
| Zero-Cross Input | Single-phase Pulse | 0 - 150 kHz |
[ Line Driver Input Specification ] Model: CNT-4922D
| Line Driver Input | Single-phase Pulse | 0.0006 Hz - 4 MHz |
| A/B Phase Signal (90° Phase Difference, Internal x4 Counting) | 0.0006 Hz - 1.5 MHz |
Rotary Encoders
Photoelectric Sensors
Linear Scales
Allows arbitrary configuration of the accumulated value per pulse and decimal point position for display.
Directly control Preset, Reset, and Hold functions via external signals.
Forward/reverse orientation can be switched via software settings alone, eliminating the need to rewire or adjust for connection mistakes during trial modifications.
Transfers display data to a PC and allows device setup via LINKSHIP software.
*An RS-232C communication cable (sold separately) is required.Cable length: 2.5 mAdds 2 additional channels to the standard 2-channel comparator output, enabling up to 4 channels of HIGH / LOW comparator outputs total.
*With BCD connector attached| > View Custom Cases |
| > View Application Cases |
