■ Converts various sensor signals to CAN bus
Select from the following measurement genres: speed/accumulation, torque/deviation, current, voltage, temperature measurement, thermocouple, and resistance.
CAN digital output data can be measured in 1 ms (depending on the model), and data measurement is less affected by noise than with conventional analog output.
*CAN communication is a communication protocol designed for use in automobiles, so it is highly resistant to noise.
In addition, the bus connection requires only three wires, which reduces wiring man-hours (at a lower cost).
[Examples of Measurement Applications]
| Motor rotation |
Engine speed |
Torque |
Fuel concentration |
PWM current |
Batterie Charge |
Fluid pressure |
| Stroke position |
Exhaust temperature |
Temperature control |
Pipe temperature |
Internal resistance |
Angle control |
etc |
Compact CAN signal converter: Various inputs, outputs, and installations
| Speed to CAN |
| SPD Series |
See details＞
Gear Sensors
Flow sensors
Encoders
|
|
| Torque to CAN |
| TQ Series |
See details＞
Torque Sensors
Flex Fuel Sensors
Uneven rotation measurement
|
|
| Current to CAN |
| PSA Series |
See details＞
Linear solenoid
PWM current
Process signals (4-20mA, etc.)
Battery charge current, etc. |
|
| Voltage to CAN |
| PSV Series |
See details＞
Pressure sensors
Displacement sensors
Process signal (1-5V, etc.)
Various voltage output type sensors |
|
| Tempereture to CAN |
| HT Series |
See details＞
Thermocouples
RTD
Thermistor
|
|
| Resistance to CAN |
| RR Series |
See details＞
Potentiometers
In-circuit resistance
|
|
 . |
Signal Converter
1CH, 6CH, 20CH, etc. |
Digital Conversion
 |
| CAN |
|
CAN to analog conversion model available
| CAN |
 |
Signal
Converter |
 |
Analog |
Choice of modules
| Direct Current |
DC voltage |
RTD |
Thermocouple |
NTC Thermistor |
Speed/Counter |
Torque |
Resistor |
Number of CHs available
| 1CH type |
Any combination of enclosures and measurements
Multi-CH type |
 |
 |
 |
 |
 |
 |
| Panel mounting type |
DIN rail mounting type |
6CH |
10CH |
20CH |
| W48, H24, D106 |
|
|
W125, H60, D120 |
W125, H30, D120 |
W125, H60, D120 |
| Select a module above |
Customizable number of CHs, modules, with/without indicators, etc. |
Please contact us for customization to meet your needs,
such as "multi-CH and multi-type measurement in a single unit" or
"in an easy-to-use housing".
To the Customization Page
|
Examples of production：
 |
What we can do with measurement
- CAN output of measurement data CAN communication with 1ms update at the fastest. Low-cost type with 40ms update is also available.
(Speed, torque, current, voltage, temperature measurement resistance, resistance: 1 ms, thermocouple: 2 ms)
- Converting to CAN reduces noise and wiring time when measuring multiple units.
- We can also customize a multi-CH type to realize multiple units or multiple types of measurement with a single unit.
CAN to analog conversion is also available. We will customize the system according to your measurement needs.
Selection Points
- In addition to CAN output, analog output, RS-485, alarm output, etc. are available.
- Available with or without indicator, DIN rail mounting type, etc.
- Customization: Combination of multiple units is available.
Contact Us