Measurement & Evaluation for Printers, Copiers, and Large Printing Presses
■ Measure and evaluate transmission errors in drive systems, such as motors, belts, and gears.
■ Monitor and control sheet-take-up speed ratios to prevent slack, tears, and printing defects.
Using Pulse Signals
Acquire pulse signals from rotating parts via rotary encoders or similar devices, and convert them into analog or digital signals.
Printers, Copiers, etc.From Rotary Encoders, etc.
Pulse Signal
OR
Rotation Speed Ratio Meter FRM-3921
Speedometer / Totalizer SPD Series
Output Analog Digital
PLC Motor Driver Controller etc.
Using CAN Bus Data
Acquire internal CAN data utilized within printers and copiers, and convert it into analog or alarm signals.
Printers, Copiers, etc.Internal CAN Bus Data
CAN
CAN Converter CAN-24 Series
Handheld Type CAN-HD
Multi-CH Type Custom Product
Output Analog
Alarm
Loggers / Oscilloscopes, etc.
Application Capabilities
Rotation Monitoring
Monitor and verify roller and gear rotation in real time.
Alarm Configuration
Trigger immediate alert outputs if an anomalous RPM is detected.
Maintenance & Inspection
Perform routine maintenance and evaluate speed uniformity.
Data Logging
Record RPM history for precise root-cause analysis during anomalies.
*Image for illustrative purposes only
Gear Sensors, Digital Instruments & Converters
High-Speed Analog Output
Up to 0.1ms output update rate (SPD)
0-10V
0-5V
±10V
±5V
4-20mA
Alarm Output Outputs alarm signals when designated RPM or temperature thresholds are exceeded.
CAN Bus Data Output (SPD)
Continuous CAN Output Easily acquire measured parameters as digital values.
Update Rate: Up to 1ms intervals
Compatible with protocols like SAE J1939 (DLC ≤ 8 bytes). *Please consult us.
Measurement from 0 Hz Gear sensors (FDP/IMG) & digital instruments (SPD)
Self-Powered GP series: Power-generating electromagnetic pickups
Key Selection Points
Gear Wheel Speed Sensors
Tracks Near-Stationary Speeds (from 0 Hz) FDP and IMG Series
Robust Sensor Face Seamless, hermetically sealed metal enclosure with IP67 rating
Cable Outlet Protection Proprietary Conical Press-fitting™ withstands environments exposed to water and oil
Conical Press™
Self-Powered Magnetic Type GP Series requiring no external power supply
Integrated Domestic Support In-house manufacturing & services (Japan)
Full Customization Available Custom probe tips, flanges, specified connectors, cables, and electronic circuits
Digital Instruments & Signal Converters
Proprietary Periomatic™ Computing for Ultra-Low Speeds
High accuracy from extremely low to high speeds. Instantly tracks rapid velocity changes and sudden stops (KAZ, SPD).
■ Fully threaded housing offers high mounting flexibility.
■ Single Hall-effect element differential method: Eliminates the need for angular adjustment during alignment.
■ Sensor Face: Seamless, hermetically sealed metal enclosure achieves an IP67 rating.
■ Cable Outlet: Proprietary conical press-fitting accommodates environments exposed to water and oil.
■ Response Frequency: 0 to 15 kHz
■ Operating Temperature: -20°C to +80°C
■ Self-powered type requires no external power supply.
■ Engineered to suppress unnecessary voltage spikes, ensuring enhanced reliability.
■ When measuring high-speed ranges only, dependable operation is maintained even with an enlarged gap.
■ Sensor Face: Seamless, hermetically sealed metal enclosure achieves an IP67 rating.
■ Cable Outlet: Proprietary conical press-fitting accommodates environments exposed to water and oil.
■ Response Frequency: 220 Hz to 50 kHz
■ Operating Temperature: -20°C to +100°C
■ Line driver output type effectively filters out transmission noise, making it ideal for long-distance wiring.
■ Dual Hall-effect element differential method: Eliminates magnetic field noise at the sensing point, suppressing jitter for stable signal outputs.
■ Sensor Face: Seamless, hermetically sealed metal enclosure achieves an IP67 rating.
■ Cable Outlet: Proprietary conical press-fitting accommodates environments exposed to water and oil.
■ Response Frequency: 0 to 20 kHz
■ Operating Temperature: -20°C to +105°C
■ Accepts 2-channel inputs from rotation pulse output sensors to calculate the speed ratio between channels.
■ Delivers high-speed computation of individual speeds (A and B), speed ratio [B/A], and speed percentage deviation [(B-A)/A].
■ Can be configured to operate as an independent tachometer for each channel.
■ Proprietary Periomatic™ technology ensures high precision and rapid response across ultra-low to high velocity ranges.
■ Equipped with standard comparator outputs; analog and digital output card options are available.
■ Multi-functional selectable indicator serving as a speedometer, frequency meter, tachometer, flow indicator, or totalizer.
■ Supports simultaneous output of 16-bit analog (0.1ms update) and CAN bus data (1ms update).
■ Proprietary Periomatic™ technology ensures high precision and rapid response from ultra-low to high speeds.
■ Allows adjustment and setup of trigger levels, hysteresis, pull-up resistors, and low-pass filters.
■ Front panel keys provide easy configuration and measurement adjustments.
■ Seamlessly configured and managed via our complimentary LINKSHIP software.
■ Multi-functional selectable indicator serving as a speedometer, frequency meter, tachometer, flow indicator, or totalizer.
■ Delivers simultaneous 16-bit analog (0.1ms update) and CAN bus (1ms update) outputs.
*Note: SPDL model features a 40ms update interval.
■ Proprietary Periomatic™ technology ensures high precision and rapid response from ultra-low to high speeds.
■ Configurable trigger levels, hysteresis, pull-up resistors, and low-pass filters.
■ Highly versatile installation options including panel mount, DIN rail mount, or portable configurations.
■ Seamlessly configured and managed via our complimentary LINKSHIP software.
■ Multi-functional selectable indicator serving as a speedometer, frequency meter, tachometer, flow indicator, or totalizer.
■ Handheld unit ideal for on-site applications such as shipping/performance checks, equipment inspections, and functional testing.
■ Simultaneous 16-bit analog (0.1ms update) and CAN bus (1ms update) outputs.
■ Dual power supply options: Driven via 4 AA batteries or the included AC adapter.
■ Proprietary Periomatic™ technology ensures high precision and rapid response from ultra-low to high speeds.
■ Fully adjustable trigger levels, hysteresis, pull-up resistors, and low-pass filters.
■ Three-way configuration system: Via on-board keys, PC software setup, or external programming units.
■ Versatile connectivity features including a unique retractable BNC connector or terminal blocks.
■ Full-scale analog output parameters and mathematical functions are easily configured via free LINKSHIP software or the optional PL-1A external setting unit.
■ Input Frequency Range: 0.006 Hz to 500 kHz
■ Analog Output: Selectable ranges between 0-10V, 0-5V, 1-5V, 4-20mA, or 0-10mA via switch and parameter settings.
Features 16-bit high resolution and a rapid 1ms output update rate.
■ High Isolation: Fully isolated electrically between input, output, and power supply stages.
Other Related Products Panel Meters / Signal Converters / Indicators
- CAN Bus Output
- 16-bit Analog (Voltage / Current) Output
- USB-C: For easy configuration and data logging
- Alarm Signal Output / RS-485 Communication
- Free LINKSHIP Software: Supports report printing and data logging
- Dual Analog Outputs [EX48 model]
- Ethernet (LAN) Connectivity [EX48 model]
Connector Modification: Simplifies on-site replacement. Integrated Flanges: Easy installation without complex gap tuning. Various custom specifications are supported, including unique probe geometry, extended cable lengths, specific connector footprints, and modified output electronics.
From Rotary Encoders, etc.
